Used Machines

Used Machines, demonstration devices, opportunities.
If you are interested, request a detailed offer.

Typ 40.120 lamella separator

Condition: New, from stock
Clearing room: approx. 12.000 l
Mud room: approx. 2.000 l
Surface of the lamellas: approx. 84 m2
Number of mud tips: 2 pieces
1 clear water outlet: DN 100
8 slurry inlet sockets: DN 50
1 pipe distributor: PVC 8 x DN 50
2 extraction nozzles for sludge: DN 80
2 manholes in mud room

Complete operational HÄCKER compact filter press system. Just set up and get started!

Chamber filter press Häcker type 01.050 with piston membrane pump 35.009 in compact design

Condition: exhibition device, unused
Plate size: 500 x 500 mm
Number of Chambers: 10 (23)
Cake Thickness: 25 mm
Content: 50 l (115)
Filter area: 4 m2 (9 m2)
Operating pressure: 10 bar
Pump flow rate: 900 l/h
Pump consumption: only 1.1 kW
Filtrate outlet: Open via filtrate angle
Filtrate channel and drip plate: stainless steel
Hydraulic control: with dead man´s switch
Pump control: with pneumatic preload and automatic switch off
Pressure vessel and piping stainless steel

Suitable e. g. for HÄCKER chamber filter press 01.047

Piston pump Häcker Typ 12.010
Complete with control

Condition: Used, completley overhauled, with pressure tank and new control box.

Flow rate: 1.000 l/h
Operating pressure: 10 bar
Drive consumption: only 1,5 kW
Housing: Polypropylene
Piston: hard plaste porcelain
Pressure vessel: stainless steel 1.4571
Control: with pneumatic preload and automatic shut off

Chamber filter press Häcker type 01.047

Condition: Used, completely overhauled.

Plate size: 470 x 470 mm
Number of chambers: 31
Cake Thickness: 25 mm
Content: 120 liters
Filter area: 11 m2
Operating pressure: 10 bar
Control: for hydraulics with dead man’s switch
Outlet: open via angle
Filtrate channel: GRP
Drip plates: stainless steel

Comments are closed.